Fujitsu fi-6000NS Operator's Manual page 170

6. Enter the e-mail contents into the "Body:" field.
The body may be up to 512 characters long, including line feeds.
If a long word that cannot fit on one line is used, the word will be automatically alterted.
7. Press the [Scan] button.
When [Scan Viewer] is Off, this will be a [Scan&Send] button.
⇒
Scanning starts.
Each page is briefly shown on the screen as it is scanned.
When the scan has completed, the "Scan Viewer" screen opens.
For more details about the "Scan Viewer" screen, refer to "4.9 Editing the Scanned Data
in the Scan Viewer" (page 201).
HINT
8. Check the scanned data.
For more details about the "Scan Viewer" screen, refer to "4.9 Editing the Scanned Data in
the Scan Viewer" (page 201).
9. On the "Scan Viewer" screen, press the [Send] button.
⇒
The scanned data is sent with the specified file as an e-mail attachment.
144
•
"Scan Viewer" is initially "On".
•
When the [Scan&Send] button is pressed (when [Scan Viewer] is "Off"),
after the last page has been displayed on the "Scanning" screen, the scan
data is attached to an e-mail and sent, and the touch panel screen returns
to the "Main Menu".
For more details, refer to "4.8 Enabling/Disabling the Scan Viewer" (page
198)