Fujitsu fi-6000NS Operator's Manual page 331

Screen
Others Cannot connect to the LDAP server.
LDAP server response error.
An error has occurred. Try turning the
power off and back on again. The
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help. [alphanumeric eight
digits]
An error has occurred. The system
must be restarted. Any buffered jobs
will be canceled. If problem persists,
the administrator should contact a
FUJITSU scanner dealer or an
authorized FUJITSU scanner service
provider for help. [alphanumeric eight
digits]
Message
Network Scanner fi-6000NS Operator's Guide
Action
Try the following checks or
solutions:
• The network settings may not
be valid. Contact a system
administrator to have the
network settings checked.
"6.3 Network Connection
Troubleshooting" (page 234)
• The server is not working.
Contact a system administrator
to have the server status
checked.
Contact a system administrator to
check whether the LDAP server is
available.
Try turning the power off for ten
seconds, and back on again. If the
problem persists, the administrator
should contact your FUJITSU
scanner dealer or an authorized
FUJITSU scanner service
provider.
If the problem persists, the
administrator should contact a
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider.
C
305