Fujitsu fi-6000NS Operator's Manual page 301

Screen
NTP Server NTP Server IP Address has not been
entered.
NTP Server IP Address is incomplete.
NTP Server Name has not been entered.
NTP Server Name contains invalid
characters.
NTP Server IP address is invalid.
System time has been successfully
synchronized.
System time synchronization failed.
Sending resync command to local
computer...
The computer did not resync because
no time data was available.
System time synchronization failed.
Sending resync command to local
computer...
The computer did not resync because
only stale time data was available.
System time synchronization failed.
Sending resync command to local
computer...
The computer did not resync because
the required time change was too big.
Time synchronization has caused the
session to timeout. Logging out now.
Message
Network Scanner fi-6000NS Operator's Guide
Action
Enter an NTP server IP address.
NTP server IP
Complete the
address.
Enter an NTP server name.
Enter a valid NTP server name.
Enter a valid NTP server IP
address.
No action required.
Try the following:
• Check the NTP server name and
address settings for errors.
• Check the network path
between to the NTP server for
problems.
• The NTP server may be busy.
Wait a short time before trying
again to synchronize the system
time. If that does not work, the
specified server may not be an
NTP server, so try a different
NTP server.
• The specified NTP server
cannot provide a trusted date
and time. It attempted to acquire
the date and time from a higher
level NTP server, but failed. Try
a different NTP server or have
the network administrator
investigate.
Refer to "3.5.4 Setting the Date/
Time" (page 44), adjust the date/
time, and try again.
No action required.
C
275