Fujitsu fi-6000NS Operator's Manual page 261

A results screen similar to the following should appear:
When checking the network connection status of a server by its IP address, the following results
are possible.
Result
"Ping statistics" shows
"Lost=0 (0% loss)"
"Ping statistics" shows
"Lost=4 (100% loss)"
"Ping statistics" shows
"Lost=N (1 to 99% loss)"
"Hardware error"
6.3 Network Connection Troubleshooting
Connection
status
OK None
NG
Check that the ping target IP address is correct.
If the ping target IP address is correct, refer to
"Failure to connect to a remote computer using its
IP address" (page 242) for further solutions.
NG There may be a quality problem with the LAN
cable. Replace the LAN cable and try again.
In "3.6.11 Checking the Network Operating Status"
(page 89), change the [Link Speed/Duplex Mode]
from "Auto-Negotiation" to a fixed mode.
NG The LAN cable may have become disconnected
during the Ping test. Check the status of the LAN
cable and try again.
Network Scanner fi-6000NS Operator's Guide
Action
6
235