Adding New Licenses With The J-Web Interface - Juniper J4350 Getting Started Manual

J4350 and J6350 Services Router Getting Started Guide
The Licenses page displays a summary of licensed features that are configured on
the Services Router and a list of the licenses that are installed on the router. The
information on the license management page is summarized in Table 44.
Table 44: Summary of License Management Fields
Field Name
Feature Summary
Feature
Licenses Used
Licenses Installed
Licenses Needed
Installed Licenses
ID
State
Version
Group
Enabled Features

Adding New Licenses with the J-Web Interface

To add a new license key on a Services Router with the J-Web license manager:
1.
2.
3.
134
Managing J-series Licenses with the J-Web Interface
In the J-Web interface, select Manage>Licenses.
Under Installed Licenses, click Add to add a new license key.
Do one of the following, using a blank line to separate multiple license keys:
Definition
Name of the licensed feature:
J-series licenses listed in Table 43.
All features—All-inclusive licenses
Number of licenses currently being used on the router. Usage
is determined by the configuration on the router. If a feature
license exists and that feature is configured, the license is
considered used.
Number of licenses installed on the router for the particular
feature.
Number of licenses required for legal of use the feature.
Usage is determined by the configuration on the router: If a
feature is configured and the license for that feature is not
installed, a single license is needed.
Unique alphanumeric ID of the license.
Valid—The installed license key is valid.
Invalid—The installed license key is not valid.
Numeric version number of the license key.
If the license defines a group license, this field displays the
group definition.
If the license requires a group license, this field displays the
required group definition.
Because group licenses are currently unsupported,
NOTE:
this field is always blank.
Name of the feature that is enabled with the particular license.