Table of Contents
Advertisement
Chapter 6 LAN Setup
6.5 The IPv6 screen
Click Network > LAN > IPv6 to open the IPv6 screen. Use this screen to configure the IPv6
settings for your Device's LAN interface. See
about IPv6.
Figure 37 IPv6
The following table describes the fields in this screen.
Table 31 IPv6
LABEL
IPv6 Feature
IPv6 Site Prefix
Configuration Type
Delegated from
WAN
WAN Interface
selected
Static
IPv6 Prefix
120
DESCRIPTION
Select Enable to activate IPv6. Select this option to enable IPv6 for this LAN
connection.
Similar to an IPv4 subnet mask, IPv6 uses an address prefix to represent the
network address. The Device uses the prefix to generate an IPv6 address.
Select this option to automatically obtain an IPv6 network prefix from the
service provider or an uplink router.
Select a WAN interface through which you want to get an IPv6 network prefix.
You should already have configured a WAN service with IPv6 enabled.
Select this option to configure a fixed IPv6 network prefix for the Device's LAN
interface.
Enter the IPv6 prefix that the Device uses to generate its LAN IPv6 address.
Appendix B on page 271
for background information
P-870HNU-51b User's Guide
Advertisement
Table of Contents
Troubleshooting
