The Dhcp Client List Screen - ZyXEL Communications P870HNU-51B User Manual

6.4 The DHCP Client List Screen

Click Network > LAN > DHCP Client List to open the DHCP Client List screen. Use this screen
to look at the IP addresses currently assigned to DHCP clients and the IP addresses reserved for
specific MAC addresses.
Figure 36 Network > LAN > DHCP Client List
The following table describes the fields in this screen.
Table 30 Network > LAN > DHCP Client List
LABEL
IP Address
MAC Address
Add Entries
#
IP Address
MAC Address
Add
Remove
P-870HNU-51b User's Guide
DESCRIPTION
Enter an IP address that you want to reserve for a specific device.
Enter an MAC address of a device on your LAN to which you want to assign the
specified IP address.
Click this to add a entry that reserves the specified IP address for the device with
the specified MAC address.
This field is a sequential value, and it is not associated with a specific entry.
This field displays the IP address currently assigned to a DHCP client or reserved
for a specific MAC address.
This field displays the MAC address to which the IP address is currently assigned
or for which the IP address is reserved.
This option is available for regular DHCP table entries. Select this to make a
regular DHCP table entry into a static DHCP entry to always assign the listed IP
address to the device with the specified MAC address.
This field is blank for dynamic DHCP entries.
This is only available for static DHCP entries.
If the static DHCP entry is for a device that is not connected, click Remove to
delete the static DHCP entry.
If the static DHCP entry is for a device that is connected, click Remove to change
the static DHCP entry into a regular DHCP entry.
Chapter 6 LAN Setup
119