Wan Interface; Wan Connection Configuration - ZyXEL Communications P870HNU-51B User Manual

Chapter 5 WAN Setup
Table 17 Internet Connection
LABEL
MLD
Modify
Add

5.5.1 WAN Connection Configuration

Click the Edit or Add button in the WAN Service screen to configure a WAN connection.

5.5.1.1 WAN Interface

This screen displays when you add a new WAN connection.
Figure 21 WAN Configuration: WAN Interface
The following table describes the labels in this screen.
Table 18 WAN Configuration: WAN Interface
LABEL
Select a layer 2
interface for this
service
Back
Next
92
DESCRIPTION
This shows whether Multicast Listener Discovery (MLD) is activated or not for
this connection. MLD is not available when the connection uses the bridging
service.
Click the Edit icon to configure the WAN connection.
Click the Remove icon to delete the WAN connection.
Click Add to create a new connection.
DESCRIPTION
Select ptm0 to use the DSL port as the WAN port and use the VDSL
technology for data transmission.
Select atmx or ipoax (where x starts from 0 and is the index number of ATM
layer-2 interfaces using different VPI and/or VCI values) to use the DSL port as
the WAN port and use the ADSL technology for data transmission.
Click this button to return to the previous screen.
Click this button to continue.
P-870HNU-51b User's Guide