The Ipv6 Screen - ZyXEL Communications P-870HN-5xb User Manual

6.5 The IPv6 screen

Click Network > LAN > IPv6 to open the IPv6 screen. Use this screen to
configure the IPv6 settings for your ZyXEL device's LAN interface. See
on page 355
Figure 49 IPv6
The following table describes the fields in this screen.
Table 25 IPv6
LABEL
IPv6 Feature
IPv6 Site Prefix
Configuration
Type
Delegated from
WAN
WAN Interface
selected
P-870HN-5xb User's Guide
for background information about IPv6.
DESCRIPTION
Select Enable to activate IPv6. Select this option to enable IPv6 for
this LAN connection.
Similar to an IPv4 subnet mask, IPv6 uses an address prefix to
represent the network address. The Device uses the prefix to generate
an IPv6 address.
Select this option to automatically obtain an IPv6 network prefix from
the service provider or an uplink router.
Select a WAN interface through which you want to get an IPv6 network
prefix.
You should already have configured a WAN service with IPv6 enabled.
Chapter 6 LAN Setup
Appendix E
109