network) to computer B (in N2 network), the traffic is sent to the Device's WAN default gateway by
default. In this case, B will never receive the traffic.
N1
You need to specify a static routing rule on the Device to specify R as the router in charge of
forwarding traffic to N2. In this case, the Device routes traffic from A to R and then R routes the
traffic to B.
N1
This tutorial uses the following example IP settings:
Table 2 IP Settings in this Tutorial
DEVICE / COMPUTER
The Device's WAN
The Device's LAN
A
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
P-870HNU-51b User's Guide
A
A
IP ADDRESS
172.16.1.1
192.168.1.1
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
R
N2
B
R
N2
B
Chapter 2 Tutorials
49