Ipv6 Lan Screen - ZyXEL Communications EMG6765-Q10A User Manual

The following table describes the labels in this screen.
Table 36 Network > LAN > IP Alias
LABEL
IP Alias 1, 2
IP Address
IP Subnet Mask
Apply
Cancel

10.6 IPv6 LAN Screen

Use this screen to configure the IPv6 address for your EMG6765-Q10A on the LAN. Click Network > LAN >
IPv6 LAN.
Figure 51 Network > LAN > IPv6 LAN
The following table describes the labels on this screen.
Table 37 Network > LAN > IPv6 LAN
LABEL
RA period
Minimum RA period
LAN IPv6 Address Assignment
Enable DHCPv6-PD
Select this option to use DHCPv6 prefix delegation. The EMG6765-Q10A will obtain an IPv6 prefix from the ISP or
a connected uplink router for the LAN.
Chapter 10 LAN
DESCRIPTION
Check this to enable IP alias to configure another LAN network for the EMG6765-Q10A.
Type the IP alias address of your EMG6765-Q10A in dotted decimal notation.
The subnet mask specifies the network number portion of an IP address. Your EMG6765-
Q10A will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the EMG6765-
Q10A.
Click Apply to save your changes back to the EMG6765-Q10A.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Enter the minimum time in seconds between router advertisement messages.
EMG6765-Q10A User's Guide
97