30.14 Language Screen
Click Configuration > System > Language to open the following screen. Use this screen to
select a display language for the USG's Web Configurator screens.
Figure 414 Configuration > System > Language
The following table describes the labels in this screen.
Table 252 Configuration > System > Language
LABEL
Language Setting
Apply
Reset
30.15 IPv6 Screen
Click Configuration > System > IPv6 to open the following screen. Use this screen to enable
IPv6 support for the USG's Web Configurator screens.
Figure 415 Configuration > System > IPv6
The following table describes the labels in this screen.
Table 253 Configuration > System > IPv6
LABEL
Enable IPv6
Apply
Reset
Chapter 30 System
DESCRIPTION
Select a display language for the USG's Web Configurator screens. You also need to
open a new browser session to display the screens in the new language.
Click Apply to save your changes back to the USG.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Select this to have the USG support IPv6 and make IPv6 settings be available on the
screens that the functions support, such as the Configuration > Network >
Interface > Ethernet, VLAN, and Bridge screens. The USG discards all IPv6
packets if you clear this check box.
Click Apply to save your changes back to the USG.
Click Reset to return the screen to its last-saved settings.
USG20(W)-VPN Series User's Guide
586