Table of Contents
Advertisement
Chapter 5 WAN Setup
Table 21 WAN Configuration: IPoE
LABEL
WAN IPv6
Subnet Prefix
Length
Static WAN
Gateway IPv6
Address
6RD (6to4
Tunneling)
6RD Endpoint IP
Address
6RD IPv6 Prefix
Back
Next
IPoA
This screen displays only when you set the DSL link type to IPoA for the ATM interface and
configure a WAN connection using the ATM interface.
Figure 26 WAN Configuration: IPoA
The following table describes the labels in this screen.
Table 22 WAN Configuration: IPoA
LABEL
WAN IP Address
WAN Subnet Mask
Unnumbered Mode
Gateway IP
Address
10
0
DESCRIPTION
Enter the bit number of the IPv6 subnet mask provided by your ISP.
Enter the gateway IPv6 address provided by your ISP.
Select this option to enable IPv6 to IPv4 tunneling. This will encapsulate IPv6
to IPv4 packets.
Select Set by DCHP if you want to obtain a 6RD endpoint IP address from a
DHCP server. Select Manual Setting to specify the 6RD endpoint IP address
manually.
If you enabled 6RD, specify the 6RD endpoint IP address.
If you enabled 6RD, specify the IPv6 prefix for the endpoint IP address.
Click this button to return to the previous screen.
Click this button to continue.
DESCRIPTION
Enter the static IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Select this if your ISP provided a range of static public IP addresses for you to
use.
Enter the Device's WAN IP address.
P-870HNU-51b User's Guide
Advertisement
Table of Contents
Troubleshooting
