Traffic Policing
Traffic policing is the limiting of the input or output transmission rate of a class of traffic on the
basis of user-defined criteria. Traffic policing methods measure traffic flows against user-defined
criteria and identify it as either conforming, exceeding or violating the criteria.
(Before Traffic Policing)
The Device supports three incoming traffic metering algorithms: Token Bucket Filter (TBF), Single
Rate Two Color Maker (srTCM), and Two Rate Two Color Marker (trTCM). You can specify actions
which are performed on the colored packets. See
each metering algorithm.
15.3 The Quality of Service General Screen
Click Advanced Setup > Quality of Service to open the screen as shown next.
Use this screen to enable or disable QoS, and set the bandwidth. See
more information.
Figure 98 QoS General
P-870HNU-51b User's Guide
Traffic Rate
Time
Chapter 15 Quality of Service (QoS)
Traffic Rate
Time
(After Traffic Policing)
Section 15.8 on page 205
Section 15.1 on page 191
for more information on
for
193