Chapter 7 Wireless LAN
Table 32 Network > Wireless LAN > General
LABEL
Apply
Reset
7.4.1 No Security
Select No Security to allow wireless devices to communicate with the access points without any
data encryption or authentication.
Note: If you do not enable any wireless security on your Device, your network is
accessible to any wireless networking device that is within range.
Figure 41 Wireless LAN > General: No Security
The following table describes the labels in this screen.
Table 33 Wireless LAN > General: No Security
LABEL
Security Mode
130
DESCRIPTION
Click this to save your changes back to the Device.
Click this to reload the previous configuration for this screen.
DESCRIPTION
Choose No Security from the drop-down list box.
P-870HNU-51b User's Guide