Route Info - ZyXEL Communications P870HNU-51B User Manual

Table 9 Status > WAN Service Statistics (continued)
LABEL
Drops
Refresh Interval
Set Interval
Stop

4.1.4 Route Info

Routing is based on the destination address only and the Device takes the shortest path to forward
a packet. Click Status > Route Info to access this screen. Use this screen to view the internal
routing table on the Device.
Figure 10 Status > Route Info
The following table describes the labels in this screen.
Table 10 Status > Route Info
LABEL
Destination
Gateway
Subnet Mask
Flag
Metric
P-870HNU-51b User's Guide
DESCRIPTION
This indicates the number of outgoing packets dropped on this interface.
Enter the time interval for refreshing statistics in this field.
Click this button to apply the new poll interval you entered in the Refresh
Interval field.
Click Stop to stop refreshing statistics.
DESCRIPTION
This indicates the destination IP address of this route.
This indicates the IP address of the gateway that helps forward this route's traffic.
This indicates the destination subnet mask of this route.
This indicates the route status.
Up: The route is up.
!(Reject): The route is blocked and will force a route lookup to fail.
Gateway: The route uses a gateway to forward traffic.
Host: The target of the route is a host.
Reinstate: The route is reinstated for dynamic routing.
Dynamic (redirect): The route is dynamically installed by a routing daemon or
redirect
Modified (redirect): The route is modified from a routing daemon or redirect.
The metric represents the "cost of transmission". A router determines the best route
for transmission by choosing a path with the lowest "cost". The smaller the number,
the lower the "cost".
Chapter 4 Status Screens
77