Adding And Using A Dect 6.0 Cordless Headset (Optional); Add A Dect 6.0 Cordless Headset To Your Telephone System (Optional) - AT&T TL86109 User Manual

Dect 6.0 2-line corded/cordless telephone/ answering system with bluetooth wireless technology
Hide thumbs Also See for TL86109:
Table of Contents

Advertisement

Appendix

Adding and using a DECT 6.0 cordless headset (optional)

You can add a maximum of two DECT 6.0 cordless headsets (purchased
separately) to your telephone system. The first headset registered with the
telephone base is assigned as HEADSET 1 while the second headset is
assigned as HEADSET 2.
You must register a DECT 6.0 cordless headset with the telephone base
before use. If it is already registered with its base, you have to deregister
it from its base before you can register it to your new TL86109 telephone
system. For more information, see the user's manual of your headset.
NOTE: You cannot use the DECT 6.0 cordless headset that is already in use on an outside
call to answer an incoming call on another line.

Add a DECT 6.0 cordless headset to your telephone system (optional)

To register a DECT 6.0 cordless headset:
1.
Place the headset in the headset base or charger and allow it to charge
for at least one hour before beginning registration.
2.
Remove the headset from the headset base or charger.
3.
Press and hold HOLD on the telephone base for about four seconds until
it shows Registering...Please wait. Then, release the button.
4.
Place the headset back to the headset base or charger.
5.
It takes up to 60 seconds to complete the registration. When the
registration completes, the telephone base displays
HEADSET Registered and you hear a confirmation tone.
NOTE: If the registration fails, the ON/OFF light on the TL7600/TL7610/TL7612 headset
flashes twice every five seconds, or the
TL7912 headset flashes slowly in red and blue. Try the registration process again.
To deregister all DECT 6.0 cordless headsets:
Press and hold FLASH on the telephone base for about 4 seconds until it
1.
shows Deregister all handsets? Then, release the button.
Press the YES softkey to continue. You hear a confirmation tone from the
2.
telephone base.
3.
The telephone base displays PLEASE WAIT... The deregistration process
takes about 10 seconds to complete. If the deregistration is successful, the
ON/OFF light on the TL7600/TL7610/TL7612 headset(s) flashes twice every
five seconds, or the
headset flashes slowly in red and blue.
NOTES:
You cannot deregister the headset(s) if any other system handset or DECT 6.0 cordless
headset is in use.
During deregistration, all cordless handset(s) and DECT 6.0 cordless headset(s) will
be deregistered.
light on the TL7800/TL7810/TL7812/TL7910/
light on the TL7800/TL7810/TL7812/TL7910/TL7912
133

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents