Table of Contents
Advertisement
Getting started
Deregistering cordless handset or cordless headset
You may need to deregister your cordless handset or headset when you have
a registered handset or headset and need to replace one. Please read all
the instructions on this page before beginning the deregistration process.
Please make sure the telephone system is not in use before deregistration.
To deregister the cordless handset or headset from the MS2085
main console
1.
On the console, press MENU
2.
Scroll down to Registration and press
3.
Scroll down to Deregistration and press
SELECT.
MENU/
4.
Press
SELECT.
MENU/
5.
Press
SELECT to choose Handset.
MENU/
-OR-
Press
or
to choose DECT Headset.
6.
The console screen shows Deregister Handset?
Press <SELECT> to confirm if you selected
HANDSET, or Deregister DECT Headset? Press
<SELECT> to confirm if you selected DECT Headset.
Press
SELECT to confirm.
MENU/
7.
The console shows Deregistering. It takes up to 10
seconds to complete the deregistration.
•
If you are deregistering the cordless handset,
the console shows Handset deregistered and a
confirmation tone when the deregistration
is successful.
•
If you are deregistering the DECT headset, the
console shows DECT Headset deregistered and
a confirmation tone when the deregistration
is successful.
NOTES:
1.
If the deregistration process is not successful, you might need to reset the system and try again.
To reset, you can press CANCEL on the console. You can also reset the console by unplugging the
power from the console and plugging it back in.
2.
To register a cordless handset again, refer to the registration information on page 13.
3.
To register a cordless headset again, refer to the registration information on page 14.
.
/SELECT
SELECT.
MENU/
15
L1
L2
L3
L4
Registration
Handset
>DECT Headset
Deregistration
L1
L2
L3
L4
Degistration
>Handset
DECT Headset
Deregistration
L1
L2
L3
L4
Deregister
Handset?
Press <SELECT>
to confirm
Advertisement
Table of Contents
