Solid State Digital Control With Humidaire - Blodgett DFG-100 XCEL Installation And Operation Manual

Operation

Solid State Digital Control with Humidaire

1
2
3
8
7
10
14
15
16
Figure 13
CONTROL DESCRIPTION
1. SELECTOR SWITCH --- controls power to the
oven for high fan, low fan or cool down.
2. DISPLAY --- displays time or temperature and
other information related to oven function.
3. HEAT LAMP --- lights when heater is on.
4. PULSE LAMP --- lights when Pulsed Fan Mode
is turned on.
5. HOLD LAMP --- lights when Hold Mode is
turned on.
6. DIAL --- used to enter set points in display
7. START/STOP KEY --- starts or stops the timer.
8. TIME KEY --- used to show time in the display.
4
9. TEMP KEY --- used to show set temperature in
the display.
5
NOTE: Actual temperature is shown while the
10. HOLD KEY --- turns Hold Mode on or off.
6
11. PULSE KEY --- turns Pulse Mode on or off.
12. LIGHTS SWITCH --- controls interior lights.
9
13. HUMIDAIRE START SWITCH --- activates
moisture injection for a preset period of time.
11
14. HUMIDAIRE LAMP --- lights when humidaire is
operating
15. RATE SWITCH --- switches oven between
standard rate (60,000 BTU) and high rate
(80,000 BTU) while in high fan.
NOTE: High rate is disabled with low fan.
12
16. GAS ON/OFF SWITCH --- press to shut off gas
to the oven.
13
20
TEMP key is held down.