Blodgett DFG-100 XCEL Installation And Operation Manual page 29

PROGRAMMING THE MANUAL KEY DEFAULT
1. Turn the SELECTOR SWITCH (1) to the de-
sired position.
2. Press the MANUAL KEY (12). The manual and
fan key LEDs light.
3. Press the TIME ARROW KEYS (3) to enter the
cook time.
4. Press the TEMPERATURE ARROW KEYS (7)
to enter the cook temperature.
5. For Cook and Hold --- Press and hold the
HOLD KEY (8). Use the TEMPERATURE AR-
ROW KEYS (7) to enter the hold temperature.
The hold key LED lights. Press the hold key
again to exit the hold mode.
For Cook with Pulse --- Press the FAN KEY
(10). Use the TIME ARROW KEYS (3) to enter
the pulse time. If no pulse is required, leave
pulse time at 0:00. The fan key LED flashes.
Press the fan key again to exit fan mode.
6. Press the PROGRAM KEY (14) to save the pro-
gram settings.
MANUAL KEY DEFAULT OPERATION
1. Turn the SELECTOR SWITCH (1) to the de-
sired position. If high fan is chosen, high rate
may be selected by toggling the RATE
SWITCH (17).
2. Press the MANUAL KEY (12). The applicable
LEDs light.
3. Press the START KEY (13). The TIME DISPLAY
(2) counts down. The manual key LED flashes.
NOTE: In Cook with Pulse the fan LED flashes.
NOTE: Press the arrow keys to change the
cook time and temperature at any
point during manual key operation.
4. When the cook time expires the applicable
LEDs and both displays flash and an audible
alarm sounds.
5. Press the STOP KEY (15) to silence the alarm.
NOTE: In Cook & Hold the alarm self cancels.
The oven cools to the hold tempera-
ture and the time display counts up.
6. Remove the product.
7. Turn the SELECTOR SWITCH (1) to OFF to
shut down the oven.
CH-Pro3 (Solid State Programmable Digital Control)
25
Operation
PROGRAMMING THE PRODUCT KEYS
1. Turn the SELECTOR SWITCH (1) to the de-
sired position.
2. Press the desired PRODUCT KEY (11). The
product and fan key LEDs light.
3. Press and hold the PROGRAM KEY (14) until
the corresponding LED flashes, approximate-
ly five seconds.
4. Press the TIME ARROW KEYS (3) to enter the
cook time.
5. Press the TEMPERATURE ARROW KEYS (7)
to enter the cook temperature.
6. For Cook and Hold --- Press and hold the
HOLD KEY (8). Use the TEMPERATURE AR-
ROW KEYS (7) to enter the hold temperature.
The hold key LED lights. Press the hold key
again to exit the hold mode.
For Cook with Pulse --- Press the FAN KEY
(10). Use the TIME ARROW KEYS (3) to enter
the pulse time. If no pulse is required, leave
pulse time at 0:00. The fan key LED flashes.
Press the fan key again to exit the fan mode.
7. Press the PROGRAM KEY (14) to save the pro-
gram settings.
PRODUCT KEY OPERATION
1. Turn the SELECTOR SWITCH (1) to the de-
sired position. If high fan is chosen, high rate
may be selected by toggling the RATE
SWITCH (17).
2. Press the desired PRODUCT KEY (11). The
applicable LEDs light.
3. Press the START KEY (13). The TIME DISPLAY
(2) counts down. The product key LED flashes.
NOTE: In Cook with Pulse the fan LED flashes.
4. When the cook or pulse time expires the appli-
cable LEDs and both displays flash and an au-
dible alarm sounds.
5. Press the STOP KEY (15) to silence the alarm.
NOTE: In Cook & Hold the alarm self cancels.
The oven cools to the hold tempera-
ture and the time display counts up.
6. Remove the product.
7. Turn the SELECTOR SWITCH (1) to OFF to
shut down the oven.