Double Section Assembly; Oven Leveling - Blodgett DFG-100 XCEL Installation And Operation Manual

Installation
Oven Assembly

DOUBLE SECTION ASSEMBLY

1. Secure the short legs to the bottom sections
as described.
2. Place the upper section in position on top of
the lower oven.
3. Attach the stacking brackets using the re-
maining 5/16" bolts shipped with the ovens.
4. Attach the flue connector.
WARNING!!
When stacking ovens be sure to remove
the single oven flue boxes prior to attach-
ing three-piece connector.

OVEN LEVELING

After assembly, the oven should be leveled and
moved to the operating location.
1. The oven can be leveled by adjusting the feet
or casters located on the bottom of each leg.
Figure 6
6
Flue
Connector