Ssd Solid State Digital Control - Blodgett ZEPH-200-G Installation Operation & Maintenance

Operation

SSD Solid State Digital Control

ON
1
OFF
2
LIGHTS
4
5
6
9
12
GAS ON
14
GAS OFF
Figure 13
HI COOL
DOWN
OFF
COOK
LOW
BLOWER MODE
CONTROL DESCRIPTION
1. CAVITY LIGHTS ON/OFF - Operates the oven cavity
lights.
2. BLOWER ON/OFF SWITCH - Controls the operation
of the blower. If the blower switch is in the OFF posi-
tion the oven will be turned off.
3. MODE SWITCH - When the switch is in the COOK
3
position, the oven can be used to cook. When the
switch is in the COOL DOWN position, the oven is
cooling down for the next bake.
4. DISPLAY - displays time or temperature and other in-
formation related to oven function.
5. HEAT LAMP - lights when heater is on.
6. PULSE LAMP - lights when Pulsed Fan Mode is
turned on.
7. HOLD LAMP - lights when Hold Mode is turned on.
8. DIAL - used to enter set points in display
7
9. START/STOP KEY - starts or stops the timer.
8
10. TIME KEY - used to show time in the display.
11. TEMP KEY - used to show set temperature in the dis-
10
play.
NOTE: Actual temperature is shown while the
11
12. HOLD KEY - turns Hold Mode on or off.
13
13. PULSE KEY - turns Pulse Mode on or off.
14. HEAT CUTOFF - used to turn gas on or off
PROGRAMMING
To set the cook temperature:
1. Press TEMP (11) key.
2. Rotate dial (8) to enter temperature.
To set the cook time:
1. Press TIME (10) key.
2. Rotate the dial (8) to enter time.
NOTE: Time is entered in hours : minutes or min-
18
TEMP key is held down.
utes : seconds.