Chapter 2. Unpacking
Printing System
2-10
DP5000 Series Printers
System Unpacking
Use the following procedure to unpack the system controller (host) and
other components of a printing system.
1. Move all the boxes to the location where the system is to be installed.
2. Place the monitor and computer (system controller PC) boxes by the
cabinet. They are unpacked when installed (see Chapter 4, "System
Installation").
3. Unpack the PC peripherals box; it contains the following items:
•
Keyboard
•
Mouse
•
PC manuals
•
PC cables.
4. Set the PC peripherals aside until ready to begin the system
installation.
5. Unpack the system accessories box. The following contains the
system components:
•
Manuals set (up to six books)
•
Cables
•
Power cord kit
•
Installation kit.
6. If options or accessories were included in the shipment, unpack those
items (see "Accessories"). Otherwise, continue with the installation
procedure (see "Printing System").