Environmental Requirements; Space Requirements; Table C.2 Environmental Requirements; Table C.3 Space Requirements - Kodak DP5120 Installation Manual

Appendix C. Site Requirements

Environmental Requirements

Environmental Requirements

Space Requirements

Table C.3 Space requirements
Component
Printer enclosure
Printer stand
System enclosure
DH5120 printhead
DH5240 printhead
DH5122 printhead
12-ft Umbilical
24-ft Umbilical
1. Dimensions in inches and centimeters, rounded to 0.1 (0.01 for printheads).
2. Measured from front edge to rear edge at the bottom (closest to the print array), alternatively called depth.
3. Measured side to side; diameter for the umbilicals.
4. For the printer, height is given with feet and without the feet installed.
5. Weights in pounds and kilograms (rounded to 0.1); system enclosure weight is cabinet and internal components excluding printer.
C-2 DP5000 Series Printers
Table C.2 lists the environmental requirements of all three DP5000 series
printers and the dual controller printing system.
Table C.2 Environmental requirements
Operating Temperature
° °
60 F (16 C)
° ° )
85 F (30 C
° ° )
104 F (40 C
1. The power-on cycle takes 7-8 minutes at 70
2. Non-condensing
Table C.3 lists the space requirements of all three DP5000 series printers
and the dual controller printing system.
2
Length Width
23.4 / 59.5 17.7 / 44.9
23.5 / 60 18.0 / 45.7
32.4 / 82.3 22.1 / 56.2
5.13 / 13.02 1.98 / 5.03
4.81 / 12.22 2.39 / 6.09
5.18 / 13.16 3.90 / 9.91
144.0 / 365.8
1.3 / 3.3
288.0 / 731.5
1 2
Relative Humidity
10-90%
Up to 90%
Up to 60%
° °
F (21 C) and 50% relative humidity.
1
Dimensions
3 4
Height
18.7 / 47.5
17.9 / 45.7
19.0 / 49.3
35.88 / 91.1
11.79 / 29.95
11.94 / 30.33
N/A
Altitude
Sea level up to 7000 ft
(2137 m)
5
Weight
110.0 / 49.8
20.0 / 9.1
45.0 / 20.4
2.5 / 1.1
5.1 / 2.3
7.0 / 3.2
14.0 / 6.4