Chapter 1. Preparation
Required Tools
Required Tools
1-2
DP5000 Series Printers
Fluidic Safety
Apply the following guidelines when handling ink, replenisher, or purge
fluid.
•
Read the Material Safety Data Sheet (MSDS) for a fluid before
handling it, and follow all instructions in the documentation shipped
with the fluid.
•
Clean up any spill immediately.
•
Wear approved protective equipment (see OSHA standards).
•
Dispose of hazardous material properly (see OSHA standards and all
local, state, and Federal regulations that apply).
Before starting the installation, check that you have the following required
tools and equipment.
•
Standard FE took kit (0177490).
•
ESD protection kit (0110094).
The following kits are recommended, but not required.
•
DTR test kit (0178399)
•
DP5120/DP5240 flush kit (0177491).