System Configuration; Single Input - Kodak EKTASCAN 160 User Manual

System Configuration

Single Input

160 Laser
121BC
5E2234 June 2000
There are many different system configurations for the
160 Laser Imager. Two examples of system configura-
tions are shown.
Imager
100BaseT
Ethernet
Modem Line (optional)
The diagram above illustrates the stand-alone Laser
Imager in a Single Input configuration. In the Single Input
configuration only one Imaging Device is connected to the
KODAK PACS Link Medical Image Manager (MIM). Using
either an internal digital or video interface the MIM
acquires medical images from the Imaging Device.
The MIM formats the input signal (digitizes the video
input, for example) and transfers the data over a
100BaseT Ethernet Network. The operator sends printing
commands to the Laser Imager from the MIM keypad, or
if autofilming is supported, from the Imaging Device.
MIM
Overview
Imaging
Device
2-3