Chapter 3. Printer Installation
Voltage Selection
Nozzle adapter
Voltage Selection
3-8
DP5000 Series Printers
Figure 3.6
Use the following procedure to set the input voltage for a DP5120 or
DP5122 printer.
Caution: Do not power up the printer until the correct voltage switch is selected.
Applying power at the incorrect voltage will damage the printer.
1. Locate the circuit breaker switch and confirm that it is in the offline (O)
position (see Figure 3.7).
2. Locate the voltage selector switch above the circuit breaker switch.
3. Loosen the two screws securing the safety cover to the switch (see
Figure 3.7).
Figure 3.7
4. Remove the fuse (0178607) (see Figure 3.8).
External 55-gallon supply containers
Voltage selector switch cover