Safety Precautions
Chapter 1.
This chapter describes the requirements for an installation, and the
following procedures and guidelines:
•
Safety precautions
•
Required tools.
Read all procedures thoroughly prior to installation. Follow any warnings
and special instructions that appear in the manuals and on labels affixed
to the printer and system components to avoid physical harm to you or the
components.
Observe the following safety precautions during all installation
procedures.
Lifting Technique
Apply the following guidelines to moving components.
•
Use two persons to lift the printer box, the printing system enclosure,
or any large component, or any box that exceeds 50 lbs (27 kg).
•
Lift carefully using the legs and not the back (see OSHA standards).
Electrical Safety
Apply the following guidelines when working with any internal component
of the printer, or around any power source.
•
Observe all precautions regarding high voltage.
•
Use proper procedures for handling electrical equipment (see OSHA
standards).
•
Observe all precautions in warning and caution notations (see
"Scope").
•
Observe proper electro-static discharge (ESD) precautions.
•
Use proper voltage levels, and observe proper grounding techniques.
•
Observe all precautions for working around electrical devices that
remain charged after input power is cut off.
Preparation
Installation Guide
1-1