Chapter 3. Printer Installation
Printer Connections
3-12
DP5000 Series Printers
Ethernet
If the installation requires the Ethernet data input option, connect the
external, coaxial data cable to the transceiver BNCM connector on the
printer back panel (see Figure 3.12).
The standard Ethernet cables are:
•
CBL-COAX THINET BNCM/BNCM 6FT (0100378-203)
•
CBL-COAX THINET BNCM/BNCM 30FT (0100378-207).
Ethernet operation requires special printer software and internal
hardware. Besides the transceiver that provides the BNCM connector
(0178559), an internal cables connect the transceiver to the DS Main
board (0178981 and 0178530). All the necessary components are
available in the 5000 SERIES ENET KIT (0181331).
For specifications of the Thinet connector used by the DP5000 series
printers, see the Service Guide.
Figure 3.12
Ethernet
Ethernet connection, printer back panel