Call Coverage - Iwatsu Omega-Phone Adix APS Owner's Manual

CALL COVERAGE

The Multipurpose buttons on the Digital Telephones may be programmed to
allow both audible and visual indication of a call ringing at another
extension. Calls made to an extension that is represented as a Call Coverage
button on another phone may be answered by that phone by pressing the Call
Coverage button. The visual indication is immediate and the audible
indication may have one of the three modes: immediate, delayed, or no ring.
When the extension monitored by a Call Coverage button is not in the
ringing state, the Call Coverage button will function as a Direct Station
Selection/Busy Lamp Field button. The Call Coverage feature will support
Intercom Tone (ringing) and Outside Line calls. Intercom calls are indicated
by a slow flashing green lamp and Outside Line calls are indicated by a fast
flashing green lamp. A good application for this feature would be a secretary
that needs to answer calls for others in the office if they are away from their
phones.
Operation
To answer a call ringing at another extension:
When you hear the special Call Coverage tone or see either a slow
or fast green flashing lamp on a Call Coverage button:
Lift the receiver
Press the desired Call Coverage button
You will be connected to the calling party. Intercom calls will
appear on your phone's Intercom button ICM and Outside Line calls
will appear on your phone's Outside Line button.
To change the audible indication mode:
Do not lift the receiver
Press the Feature button FEAT
Press the desired Call Coverage button and the present mode
will be represented by the lamp on the button and the display.
immediate: display = Immed.
delayed: display = Delayed
no ring: display = No ring

Dial for immediate ring mode

Dial for delayed ring mode

Dial for no ring mode
DIGITAL TELEPHONE USER GUIDE - 80
lamp = fast green flash
lamp = slow green flash
lamp = solid green