Ix-Dti-N; Ix-Vcomp; Ix-Pllu; Ix-T1Rcv - Iwatsu Omega-Phone Adix APS Owner's Manual

IX-DTI-N

The IX-DTI-N card directly connects two ADIX APS systems for Campus
APS Networking via a point-to-point T1 span. The IX-DTI-N card is
required at both ends of the Campus APS T1 span. In order to operate in a
Campus APS application, the IX-DTI-N card must be equipped with an IX-
VCOMP Voice Compression Card. This card allows channels of the T1 span
to be compressed to support a maximum of 46 remote ports.
Ports: 8, 16, 24 channels/card
Features: Campus APS Networking
Other Requirements: IX-VCOMP Voice Compression Card

IX-VCOMP

The IX-VCOMP Card provides voice compression in the Campus APS
application. This card allows channels of the T1 span to be compressed to
support a maximum of 46 remote ports.
Ports: None
Location: IX-DTI-N

IX-PLLU

The IX-PLLU provides the synchronization between the T1 Span and the
ADIX APS system highway. This card is required in all ADIX APS systems
utilizing the IX-T1DTI card with either an IX-HWCE or IX-HWCL card
installed in the system.
Ports: None
Location: IX-HWCE

IX-T1RCV

The IX-T1RCV is a receiver card that is only required if any of the T1
channels are receiving DTMF signals, i.e., DID, ANI, DNIS, E&M, TIE,
OPX. This card provides eight receivers, dedicated to the first eight
channels, and allows the addition of two IX-8ERCV cards to provide a total
of 24 receivers. Receiver circuits 9-24 are dedicated to channels 9-24
respectively.
Ports: None
Circuits: 8 DTMF receivers
Location: Card slot to the right IX-T1DTI or IX-DTI-T card
ADIX APS GENERAL DESCRIPTION - 32