ANSWERING A CALL THAT RETURNS TO THE
ATTENDANT POSITION
Calls that were transferred and not answered, on Hold or Call Park too long,
will ring and light the lamp on the Recall button RECALL at the Attendant
Position.
Operation
To answer a call that returns to the Attendant Position:
Lift the receiver
Press the red flashing Recall button RECALL
MAKING AN OUTGOING CALL
Operation
Lift the receiver
Press the desired outside line and the lamp will flash green
Wait for the dial tone
Dial the desired phone number
MAKING AN INTERCOM CALL
Operation
Lift the receiver
Wait for the dial tone
Dial the desired extension number
Or
Press the designated button for the desired extension number on
the Direct Station Selection Unit
ATTENDANT POSITION USER GUIDE - 133