Advertisement
Quick Links
S
L
T
INGLE
INE
ELEPHONE
S
U
TATION
SER
Q
R
G
UICK
EFERENCE
UIDE
INTRODUCTION
Using the Receiver Button to Access ADIX
Features - By performing a hookswitch flash
(quickly pressing and releasing the Receiver
Button) and dialing the desired Feature
Operation Code, you can easily access ADIX
features.
Each feature operation code must be
programmed in the ADIX database by your
system installer. Space is provided on the inside
back cover of this guide to write your feature
operation codes for quick reference. Check with
your telephone system administrator if you
encounter problems accessing any of the
features described in this guide.
BASIC FEATURES
Making An Outgoing Call
Lift the receiver
Dial the outside line access code*
When you hear the dial tone dial the
telephone number
Make a Dialing Mistake?
Hang up, then start again
Receiving An Incoming Call
When your phone rings:
Just lift the receiver. The call is automatically
connected
* All access codes are programmed by the system
911 Support
At default, ADIX is programmed to automatically
contact your local Public Safety Answering Point
(PSAP) when 911 is dialed. In addition, ADIX is
one of the only systems that supports Enhanced
911 Service. Enhanced 911 Service ensures that
when 911 is dialed from a system extension,
information that allows the PSAP to identify the
caller’s location in a building is sent to the PSAP
along with the call. Check with your system
installer or Authorized Iwatsu Distributor to
make sure your system is programmed for
Enhanced 911 Service.
Advertisement
Related Manuals for Iwatsu ADIX
Summary of Contents for Iwatsu ADIX
-
Page 1: Making An Outgoing Call
UIDE At default, ADIX is programmed to automatically contact your local Public Safety Answering Point (PSAP) when 911 is dialed. In addition, ADIX is one of the only systems that supports Enhanced 911 Service. Enhanced 911 Service ensures that when 911 is dialed from a system extension, information that allows the PSAP to identify the caller’s location in a building is sent to the PSAP... -
Page 2: Advanced Features
When you want to automatically redial the last number you called: Lift the receiver From a touchtone telephone press From a rotary telephone dial the Last Number Redial code The system automatically dials the last number you dialed ADVANCED FEATURES... -
Page 3: Call Pickup
Changing the Call Forward Mode All Calls Automatically forward all calls arriving at your telephone to another extension. Lift the receiver Dial the Call Forward Mode Change code and dial When you hear the confirmation tone hang Busy Forward calls only when you are busy on another call. -
Page 4: Do Not Disturb
Number Callback code When you hear the confirmation tone hang Conference During a call the ADIX system allows you to make conference calls with any combination of up to four extensions and outside lines. Add-On (Up To 1 Outside + 3 Inside Parties Or... -
Page 5: Message Waiting
Quickly press and release the receiver button Dial the Message code When you hear the confirmation tone hang If the extension you called is an ADIX digital telephone, the lamp on the message button [MSG] will light. If it is a single line telephone with a message lamp, the message lamp on the phone will flash. - Page 6 FEATURE OPERATION CODES To access the features listed below, lift the receiver, then follow the operation instructions. Use the Code column to write the operation code programmed in your system database. Note: “Hook” means “press and release the receiver button quickly.” Feature Code Operation Account Codes...