Busy Icm Callback; Busy Number Callback; Call Coverage; Call Pickup - Iwatsu ADIX APS Quick Reference Manual

Busy ICM Callback

When you call another extension and get a busy
signal, do not hang up
Press the [FEAT] button and dial 
or
Press the [ICM CALLBACK] button (if assigned)
Hang up after you hear a confirmation tone
When the busy extension becomes available, the
system will call you back
Lift receiver
You are automatically connected to the extension.

Busy Number Callback

When an outside number you have called is busy,
you may tell the system to remind you to try again.
Do not hang up
Press the [FEAT] button and dial 
or
Press the [TRUNK CALLBACK] button (if assigned)
Dial the desired time you want to be called back
Hang up after you hear a confirmation tone
After the set time, the system will call you back to try
again
Lift receiver to automatically dial the number
To Cancel Busy Number Callback
Lift the receiver
Press the [FEAT] button and dial 
or
Press the [TRUNK CALLBACK] button and
Hang up after you hear a confirmation tone

Call Coverage

Multipurpose buttons on digital multiline telephones
can be assigned as Call Coverage buttons to indicate
calls ringing at another extension. If you have a Call
Coverage button for another extension on your
telephone, you can answer calls ringing at that
extension by pressing the Call Coverage button.
7
To answer a call ringing at another extension
When you hear the Call Coverage tone or see the
green Call Coverage lamp indication on your phone
Lift the receiver
Press the [CALL COVERAGE] button
You will be connected to the call
To change the type of indication at your phone
Do not lift the receiver
Press the [FEAT] button
Press the desired [CALL COVERAGE] button
The present indication mode will be displayed
Dial the number for the desired mode
Dial  for immediate display and ringing
or
Dial  for delayed indication (display and ringing
starts if call is not answered within a
preprogrammed time)
or
Dial  for no ringing (lamp indication only)
Call Pick-Up
Internal Group
You may answer calls to any extension in your pick-
up group without dialing the extension number.
When you hear a call ringing at another extension
Lift receiver
Press [FEAT] and dial 
or
Press the [GROUP CALL PICK-UP] button (if assigned)
The incoming call is connected to your extension.
Direct Extension
You may also answer an incoming call at another
extension
Lift the receiver
Press the [FEAT] button and dial 
or
Press the [DIRECT CALL PICK-UP] button
Dial the number of the extension where the call
is ringing
The incoming call is connected to your extension.

Conference

The ADIX system allows you to make conference
calls with any combination of up to four extensions
and outside lines on the same call.
8