Station Class Restriction Change - Iwatsu Omega-Phone Adix APS Owner's Manual

STATION CLASS RESTRICTION CHANGE

ADIX may be programmed to allow different outside calling restrictions to
be set based on Day and Night Mode system operation. Station Class
Restriction Change allows you to instruct ADIX that an extension or group of
extensions are to always operate in either the Day or Night Mode restriction
pattern during Day Mode operation.
Operation
This feature is performed by using the display and the Soft Function buttons.
To get to the Station Class Restriction Change prompts:
Press the ETC button one time and the display will show:
GNT SSC
F1
Press the F2 SSC button and the display will show:
***Station Service Class (EXT)***
Service Class Mode <EXT_>
DISP GRP
F1
To change the restriction for an individual extension:
Dial the extension number and the display will show the current
mode:
Service Class Mode <EXT 207>1
Dial 1 for Day Mode
Dial 2 for Night Mode
Press the END button
To change the restriction for a group of extensions:
Press the F2 GRP button and the display will show:
***Station Service Class (Group)***
Service Class Mode <Group_>
DISP
F1
Dial the extension group number
will show the current mode:
Service Class Mode <Group 1>1
Dial 1 for Day Mode
Dial 2 for Night Mode
Press the END button
ATTENDANT CONSOLE USER GUIDE - 171
TAC MWC SPDR
F2 F3 F4 F5
F2 F3 F4 F5
F2 F3 F4 F5
-
F6
F6
F6
and the display