Ix-8Subs-3; Ix-8Esubm; Ix-4Subl - Iwatsu Omega-Phone Adix APS Owner's Manual

IX-8SUBS-3

An IX-8SUBS-3 provides connection of up to eight station ports for on-
premises single line telephones. The IX-8SUBS-2 includes the DTMF
receivers required for 2500 (Touch-tone) type telephones and provides a
hardware loop open feature for Voice Mail Integration.
Ports: 8 ports/card
Stations: 500 (Dial Pulse) or 2500 (Touch-tone) type telephones.
Additional Power: IX-PMMSG and Ring Generator (IX-RNGU or
IX-RNGUM)
Loop Limit: 600 Ohms

IX-8ESUBM

An IX-8ESUBM card provides eight station ports for on-premises single line
telephones with message lamps. This card also includes eight DTMF
receivers for 2500 type (DTMF) telephones. The IX-8ESUBM card
supports both one-pair wire and two-pair wire connections. An optional IX-
PMMSG power supply may be mounted on board to provide 90 VDC for
lighting telephone message lamps.
Ports: 8 ports/card
Stations: 500 (Dial Pulse) or 2500 (DTMF) type telephones
Additional Power: Ring Generator (IX-RNGU), + 90 VDC (IX-DCDCA or
IX-PMMSG on board)
Other Requirements: None
Loop Limit: 600 Ohms

IX-4SUBL

An IX-4SUBL card provides four station ports for off-premise single line
telephones (OPX). The ports provide -48 VDC talk battery for network
compatibility. An additional DTMF receiver is required on the board when
2500 type (DTMF) telephones are connected.
Ports: 4 ports/card
Stations: 500 (Dial Pulse), or 2500 (Touch- Tone) type telephones.
Additional Power: Ring Generator (IX-RNGU or IX-RNGUM), -48 VDC
(IX-DCDCA, IX-DCDCB or IX-DCDCM)
Other Requirements: IX-4RCVS for 2500 type single line telephone
Loop Limit: 1200 Ohms
FIC Code: OL13C
ADIX APS GENERAL DESCRIPTION - 28