WHISPER PAGE
The Whisper Page feature allows ADIX station users to communicate with
busy extensions without requiring the IX-BPAD Busy Bypass Unit. This
feature is available from any ADIX digital key telephone, SLT, or Attendant
station. When a busy station is called using the Whisper Page feature, the
busy station will hear the voice announcement via the handset receiver.
Neither the whisper page, or the busy station's response is audible to the
outside calling party.
You may also use the Text Message feature to respond to a Whisper Page.
Operation
To Whisper Page a busy station:
After calling a busy station and receiving busy tone
Press [*]
To communicate with a station that whisper paged your extension:
After receiving a whisper page
Press [*]
You may now communicate with the station that sent you the
whisper page. The other calling party cannot hear your
conversation
To resume speaking with the original caller, press [*] a second
time.
To send a Whisper Page during consultation hold
During consultation hold press * and announce the call
If the busy station wishes to take the call, hang up to camp-on
the call
To select and send a text message to the originating Whisper Page station:
After you receive a whisper page, press the Text Message
button TEXT MSG + text message number (00 – 99), or the
Preprogrammed Text Message button TEXT MSGn
For more information on Text Messaging, see Text Messaging in
this section.
DIGITAL TELEPHONE USER GUIDE - 124