Zt-D Telephones - Iwatsu Omega-Phone Adix APS Owner's Manual

ZT-D TELEPHONES

The telephone sets from Iwatsu's smaller ZT-D system may be used with
ADIX. ZT-D Telephones (shown in Fig. 3) have four Fixed Feature buttons
and six Programmable Feature buttons. The four Fixed Feature buttons are
permanently assigned as Intercom (ICM), Transfer (TRAN), Feature (FEAT)
and Hold/Do Not Disturb (HOLD/DND).
These telephones are available in three different configurations that provide
either an additional six, 12 or 24 more buttons. These additional buttons are
called Multi-purpose buttons and may be programmed for outside line and
feature appearances.
All three models of the ZT-D Telephone are available with an optional
1-line, 16 character liquid crystal display. This display is very helpful for
using advanced features and for those who spend a great deal of time on the
phone.
Refer to the Digital Telephone User's Guide for feature operation. ZT-D
Telephones have all the capabilities described in the Digital Telephone
User's Guide with the following exceptions:
An Autodial Unit or Busy Bypass/Autodial Unit may not be
added
The ZT-D Display Telephone only has a 1-line display and,
therefore, cannot display a system name
ZT-D telephones do not support the Group Monitoring feature
The off-hook call announce (Busy Bypass Voice Calling) feature provided in
the ZT-D "X" model telephones can be used in ADIX APS systems starting
with software version 4.2.
ZT-D TELEPHONE USER GUIDE - 213