Call Intercept; Call Swap - Iwatsu Omega-Phone Adix APS Owner's Manual

CALL INTERCEPT

This programming option allows outside calls to be directed to ring at the
Attendant Position if they go unanswered, if they are transferred to a non-
existent extension or if they reach an extension in the Do Not Disturb mode.
These calls will ring and light the lamp on the Recall button RECALL at the
Attendant Position.
Operation
None

CALL SWAP

Allows you to alternate between the outside calling party (the source) and the
requested extension user (the destination) during the process of transferring a
call without having to use the Hold button HOLD/DND.
Operation
To alternate between the Source and the Destination:
Press the Swap button SWAP or SPLIT if assigned and the
button will flash red
Or
Press the red flashing Source button SOURCE to speak with
the outside call or press the red flashing Destination button
DEST to speak with the extension if assigned as buttons
The Attendant Position may be programmed to have either a Swap
button or Source and Destination buttons, but not both.
ATTENDANT POSITION USER GUIDE - 137