How To Use The Curved Ebl With Yokogawa Autopilot - Furuno FEA-2100 Operator's Manual

How to use the Curved EBL with Yokogawa Autopilot

Curved EBL is a design and control tool to start a turn at correct position and to monitor behaviour of the own ship
during turn. The Curved EBL is available on ECDIS screen and on some selected ARPA radar displays.
Before turn you can use the Curved EBL to select best position to initiate intended turn. In this so called design
phase the own ship pushes Curved EBL in front of the ship. This design phase is available in:
•
Not available with Yokogawa Autopilot
The Curved EBL is locked to its position when the own ship start a turn initiated by
•
Automatic Route Steering
During the turn you can monitor how your ship performs the intended manoeuvre against the plan by comparing the
Curved EBL position and your current own ship position.
Curved EBL at the wheel over point.
Locked Curved EBL during turn.
Steering with Yokogawa Autopilot • • • • 393