Table of Contents
Advertisement
Route planning main menu
Main parameters for the Route Planning are:
•
Latitude and longitude of the waypoint
•
Channel limits to the waypoint
•
Turning radius of the waypoint
•
Maximum and minimum speed limits for a leg
There are two push buttons to control a route. The other push button is used for planning the routes and the other
one is used to select and control a route for monitoring.
To complete Route planning, proceed as follow:
1.
Create a new route or select existing one for route planning. See chapter "How to create a new
route" on page 226.
2.
Modify your route if necessary. See chapter "How to modify already existing route" on page
232.
3.
Make Chart Alarm (Safe water) calculation. See chapter "Chart Alarms sheet" on page 230.
4.
Optimize your route. See "Optimization" on page 236.
Operation of Route planning push button is following:
1. When you press ROUTE PLAN push button, ROUTE PLANNING dialog box will appear to
Dialog box area.
2. If you already have ROUTE PLANNING dialog box on display and you press ROUTE PLAN
push button, you will get Route planning menu on display.
ROUTE PLAN button
Backup and Restore:
You can make a backup to floppy disk or restore a route from floppy disk. See also "Backup Operations" on page
291.
Report:
Use this to generate report of planned route.
Full wp report:
Use this to generate detailed report of planned route.
Passage plan:
Use this to generate a combined report from active Planned Route and active Pilot Data.
Note
To get planned route to be displayed, make sure that desired options of the planned route (Center Line, Channel
Borders, Wp-marks and Leg marks) are selected either Std or Other on the ROUTE -sheet.
224 • • • • Route planning
menu:
Select:
You can select already existing route to be edited. Choose Select from the
menu, there will appear a list box in Dialog box area. Choose appropriate route
in list box of routes.
Cancel:
You can remove selected ROUTE PLAN file from display.
Create:
Choose Create from menu, if you want to make a new route, there will appear
typewriter in the Dialog box area. Give name to route max. 8 letters. See also
"How to create a new route" on page 226.
Exchange:
This function is used to exchange planned and monitored routes. Planned route
is used both as alternative route and as editable route.
Copy from monitored:
This makes copy from monitored route for edited one. You can give name for a
new route to plan which is copied from monitored route.
Advertisement
Table of Contents
