Grey Scale Test - Furuno FEA-2100 Operator's Manual

Electronic chart display and information system

Hide thumbs Also See for FEA-2100:

Table of Contents

Grey Scale test

Set Brilliance and Contrast to calibrated positions. Use Grey Scale to visually inspect neutral shades of grey.

Note, during Selftest the ECDIS is unable to do any navigation related things and as an indication the System Failure

is activated in the Control Panel.

To activate grey scale test proceed as follows:

1. Press INITIAL SETTING button and select Selftest from the menu.

2. Confirm starting Selftest, press OK.

3. The system will end normal operating and start a Selftest module.

4. Execute Display of Selftest pressing soft key button.

Colour Calibration • • • • 359