How to save past track of a selected ARPA target
To save past track of selected target, proceed as followed:
1.
Check number of ARPA targets. In order to get it move cursor above target and press INFO & HELP button.
2.
Press Voyage Record button and select Settings from the menu. A Settings dialog box appears, select Danger
Target sheet open.
3.
Select Single Target Log tick box and enter ARPA target's number in edit box. See also "Danger targets log" on
page 342.
Note! If you have selected Single Target Log only selected target's information is recorded. If you want record
information of all danger targets, just remove selection of Single Target Log.
Chart usage log
In Chart usage log is used to store information of charts which were displayed in the ECDIS chart display area or
which were used for Chart Alarms. The following information is recorded by the system:
•
Chart ID.
•
Chart edition.
•
The latest update included to chart.
•
Displayed Updates Until
•
Approved Updates Until
•
center position of display (Lat, Lon).
•
Scale of chart display.
•
Details of chart selected to be displayed.
Recording functions • • • • 343