Temporarily the RENC could not
create Permits for you order. Try to
order again.
How to order Charts from a RENC by Telecomm
You have two basic alternatives to order Charts by Telecomm.
1. Missing / Current Edition. This orders only updates. Thus the required time is short and telecommunication
cost is low. NOTE! If there a new edition of the charts available in the RENC, you cannot get your charts up-to-
date by "Missing / Current Edition"
2. Missing / Latest Edition.. This orders everything. Thus the required time is long and telecommunication cost is
high"
After you have establish a connection to the RENC to order Chart(s), proceed as follows:
If you order chart(s) and their updates using RENC Telecomm Manager, you have to have permits for corresponding
charts loaded into ECDIS.
If you have a valid subscription Permit for a chart an you order Charts by "Missing / Latest Edition", the system
automatically order missing subscription Permits for new editions of the Charts.
1. Press CHART PLAN push button
2. Select RENC Telecomm Manager from the menu.
3. Select Chart or Group in a list box and then select desired Chart or
Group using button in upper right corner (Text in Button depends your
selection in list box).
Select Chart from a list box . Select "Missing / Latest Edition" or
"Missing / Current Edition". Press Order button.
Vector Chart material • • • • 111