Table of Contents
Advertisement
Alarm number
2054:
Alarm number
2055:
Alarm number
2060:
Alarm number
2061:
Alarm number
2063:
Alarm number
2064:
Alarm number
2067:
Alarm number
2071:
ROUTE:ILLEGAL FINAL WAYPOINT/7
------------------------------
FINAL WAYPOINT DOES NOT EXIST
IN ROUTE FILE.
VERIFY IN 'ROUTE MONITOR' THAT
A VALID ROUTE IS SELECTED.
ARPA RADAR COMMUNICATION ERROR/1
------------------------------
ECDIS CANNOT COMMUNICATE WITH
ONE OF THE ARPA RADARS.
VERIFY THAT 'AUTOTRACKING ON'
AND 'INC ON' ARE DEPRESSED ON
THE ARAPA RADARS.
ROUTE: WP CHANGE DISABLED
------------------------------
NEXT WAYPOINT CANNOT BE
CHANGED DURING ROUTE STEERING.
USE 'AUTOPILOT' -MODE
TO OVERRIDE ROUTE STEERING BE-
FORE SELECTING A NEW NEXT
WAYPOINT.
CHART ALIGN: EXECUTING
------------------------------
IF CHART ALIGNMENT IS DONE BY
MEANS OF SELESMAR ARPA RADAR,
THEN THIS ALARM IS DISPLAYED
AS LONG AS YOU DEFINE
ALIGNMENT
ROUTE:SELECT DISABLED
------------------------------
A NEW ROUTE CANNOT BE SELECTED
DURING ROUTE STEERING.
USE 'RADIUS CONTROL'
TO OVERRIDE ROUTE STEERING
BEFORE SELECTING A NEW ROUTE.
ROUTE:CANCEL DISABLED
------------------------------
A ROUTE CANNOT BE CANCELED
DURING ROUTE STEERING.
USE 'RADIUS CONTROL'
TO OVERRIDE ROUTE STEERING
BEFORE CANCELING THE ROUTE.
MANUAL DRIFT DISABLED
------------------------------
MANUAL DRIFT VALUE CAN ONLY BE
INSERTED WHEN NO SENSORS PRO-
VIDE SPEED OVER GROUND DATA.
USE 'SENSORS' BUTTON TO
VERIFY AND SELECT SENSORS TO
BE USED.
SOURCE ARPA RADAR CHANGED
------------------------------
MASTER RADAR FOR ECDIS HAS
BEEN CHANGED.
VERIFY NEW SOURCE OR TRACKED
ARPA TARGETS
/7
/7
/7
/7
/7
/1
Alarms • • • • 399
Advertisement
Table of Contents
