Table of Contents
Advertisement
How to establish a Telecomm connection to a RENC
If you want order Product list, Permit, Cell or Update from a RENC, you have to establish connection to a RENC
first. To do this, proceed as follows:
Press CHART PLAN push button.
Select RENC Telecomm Connect from the
menu.
In Dial-Up Networking dialog box check you
have correct phone number, then press Dial
button to call a RENC though the Internet.
A Dial-Up Networking Monitor dialog box
appears. During the connection establishment
you will get a few dialog boxes on display, which
is indicating progress of connection:
Verifying username and password of your
Internet connection.
Registering your computer to the Internet
Authentication of your computer by the Internet
Confirmation of established connection.
Dial-Up Network Monitor window will remain
permanently displayed on the screen.
You can monitor from this box how connection
is going.
1. CD, when this light turns on, the connection
to the RENC has been established.
2. TX, when flashing the ECDIS is transmitting
data to the RENC.
3. RX, when flashing the ECDIS is receiving
data from the RENC.
4. ERR, when flashing there has been an error,
when transmitting data between the ECDIS
and the RENC.
5. When CD light is on, you are connected to
the RENC and you able to purchase from the
RENC.
102 • • • • Vector Chart material
Advertisement
Table of Contents
