An example of Easy Lateral sea Mark
The method is similar also for Easy Cardinal sea marks, Easy Other sea marks, Easy Lights and Easy Obstructions.
1. Press New button in Manual Update Planning window.
2. Select Easy Lateral Sea Mark in Category in list box of New Object window.
3. Then make selections.
4. Press Accept New Object.
5. New object is displayed in a List of Manual Update Planning window. Then press Edit Position and Properties.
6. Press Edit Position
7. Move cursor over desired location on ECDIS screen. And press SELECT pushbutton.
8. Press directly Accept Manual Updates as Permanent
1.
5.
8.
196 • • • • Manual Updates
8.
3.
2.
4.
6.
7. Set the position
with cursor
and press SELECT