Recalculate Route
ROUTE PLAN button
First double click Route Plan pushbutton.
Then select desired route for planning using Select from above menu.
Recalculate timetable and ETA values
Adjust the arrival times of a route to be correct for the departure time. Recalculation can be done using Route
Planning and Params. Set at least ETD to correspond departure time and perform desired optimization.
Set at least ETD to date and
time edit box in ETD/UTC
field to correspond departure
time.
If you have optional VOS package for more detailed optimisation use it now.
For more information VOS
optimization, see Chapter "VOS operations".
Check your route against Chart Alarms
Before you sail your route, you should always check your route again for Chart Alarms. This is important because
your S57 charts and manual updates may contain any amount of date dependent information. Check of Chart
Alarms can be done using Route Planning and ChartAlarms.
After check of Chart Alarms cancel selection of the Planned Route in order to enable the selection of it for route to
be monitored. Use Cancel from above menu to do it.
38 • • • • Set up before departure