Table of Contents
Advertisement
Alarm number
2459:
Alarm number
2480:
Alarm number
2488:
Alarm number
3000:
Alarm number
4000:
Alarm number
4001:
Alarm number
4005:
STEERING PARAMETER ERROR
------------------------------
TRACKPILOT PARAMETER HAS
AN ERROR IN ITS CONTENTS.
CHECK AGAIN INSTALLATION PARA-
METERS OF ECDIS.
TRACK PILOT RECEIVE ERROR
------------------------------
ECDIS CANNOT RECEIVE ANY DATA
FROM TRACKPILOT. TO QUIT ALARM
CHANGE "MAIN STEERING"-SELEC-
TOR TO ANY OTHER POSITION THAN
AUTOP.
CHECK AND VERIFY TRACK
PILOT OPERATION BEFORE NEW TRY
INTEGRATED STEERING LOST
------------------------------
CONNECTION TO THE TRACKPILOT
HAS BEEN LOST WHILE THE SYSTEM
PERFORMED ONE OF THE
INTEGRATED STEERING MODES:
- GOTO TRACK
- GOTO WAYPOINT
- PROGRAM TRACK TURN
CURRENT STEERING MODE CANNOT
CONTINUE
CHECK NEW STEERING SITUATION
PARAM CHANGE DISABLED
------------------------------
INSTALLATION PARAMETERS CAN BE
CHANGED ONLY IF THE ROUTE
STEERING IS NOT ON AND THE
KALMAN FILTER IS NOT USED.
CHECK THE SITUATION AND TRY
AGAIN.
NO SENSOR PARAMETERS
------------------------------
SENSOR PARAMETER
MISSING.
LOAD INSTALLATION PARAMETERS
OF ECDIS.
IF REQUIRED USE
BACKUP COPY OF PARAMETERS.
B-ADAPTER ERROR
------------------------------
B-ADAPTER DOES NOT OPERATE
DUE TO A SYSTEM FAULT.
SWITCH OFF MAIN CIRCUIT BREA-
KER AND THEN ON AGAIN.
CALL SERVICE IF FAILURE STILL
EXISTS.
GYRO ERROR
------------------------------
GYRO1 DATA IS NOT RECEIVED
CORRECTLY.
USE 'INITIAL SETTINGS' MENU
TO SET GYRO AGAIN.
IF FAILURE STILL EXISTS, USE
'SENSORS' SPEED/POSITION PAGE
TO SELECT VALID SENSORS.
/7
/1
/2
/3
/2
FILES ARE
/1/8
/3
Alarms • • • • 401
Advertisement
Table of Contents
