Table of Contents
Advertisement
How to modify existing chart object
Mariner cannot permanently remove from the chart display any of the official chart objects, but he can modify
position and/or properties of chart objects. When mariner modifies chart object the ECDIS will mark original chart
object as deleted and a copy of original chart object as inserted.
1. Press Modify button in a Manual Update Planning
2. Move cursor over desired object and press SELECT push button.
3. Select the object in Objects by Cell window. You can also view data of each object before making your
selection.
4. Press Accept
5. Press Edit Position and Properties
6. If you want to modify the position of the object press Edit Position. Otherwise continue from point 10.
7. Move cursor over desired location on ECDIS screen. And press SELECT pushbutton.
8. Now you can use fast lane and press directly Accept Manual Updates as Permanent. If you want to modify
also properties continue from point 9.
9. If you want to modify also properties press Accept,
10. If you want to modify the properties of the object press Edit Properties list and values. Otherwise continue
from point 8.
11. Pick from the list properties you want to modify and give them new values. You can also add new properties or
remove old.
12. Press Accept List and values to continue from point 6 or 10 again. Otherwise continue from point 8.
Manual Updates • • • • 193
Advertisement
Table of Contents
